Arb 3450080 Manuel d'utilisateur télécharger pdf

20-5-98 Page 1 of 4 3782549

If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.

Head Office – ARB corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807

WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190

JEEP CHEROKEE ARB WINCH BULL BAR 1997 ON No 3450080

WARNING

FOR VEHICLES EQUIPPED WITH SRS AIRBAG

WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT

PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.

TAKE NOTE OF THE FOLLOWING:

• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE

HARDWARE SUPPLIED.

• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED

BY ARB.

• DO NOT REMOVE LABELS FROM THIS BULL BAR.

• THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.

FITTING KIT No 6171262

USE

PART No

QTY

DESCRIPTION

CONTROL BOX BRACKET

3751564

BRACKET CONTROL BOX

TO BULL BAR

6151021

BOLT M8 X 1.25 X 20mm

6151132

NUT FLANGE M8 X 1.25

4581044

WASHER FLAT M8 X 17 X 1.2

WINCH TO BULL BAR

6151110

BOLT UNC 5/8 X 6” GRADE 8

6151140

NUT UNC 5/8 NYLOC

4581051

WASHER FLAT 5/8”

6151074

BOLT UNC 3/8 X 1 ¾” GR5

6821110

RUBBER GROMMET

BULL BAR TO CHASSIS

3193540

PLATE - CAPTIVE NUT ASSY

4581049

WASHER FLAT 1/2" X 1 1/8" X 12G

4581050

WASHER SPRING 1/2" X 1/8" X 1/8"

4581040

WASHER FLAT M10

4581048

WASHER SPRING M10

6151071

BOLT UNC 3/8 X 1”

6151100

BOLT UNC 1/2X11/2” CLASS 8

6151138

NUT UNC ½”

5846267

PACKER

No PLATE BRACKET,

3751485

BRKT NUMBER PLATE

NUMBER PLATE AND

6151017

BOLT M6 X 1.0 X 16mm

INNER GUARD

6151046

WASHER FLAT 6mmZP

6151128

NUT FLANGE M6 X 1.0

3500080

ARB INDICATOR KIT

1 2 3 4

Résumé du contenu

Page 1 - WARNING

20-5-98 Page 1 of 4 3782549 If you have any queries regarding the installation of this product please contact the distributor from whom

Page 2 - PROCEDURE

20-5-98 Page 2 of 4 3782549 TOOLS REQUIRED Basic tool kit, drill and ½” drill bit PROCEDURE 1. Place the bull bar onto a suitable stand. 2.

Page 3

20-5-98 Page 3 of 4 3782549 11. Feed the control box cables down through the grommet to the winch motor. 12. Position the winch on the top of a

Page 4

20-5-98 Page 4 of 4 3782549 DIAGRAM 4 21. Align the bull bar and tighten the two 3/8” bolts. 22. Using the bull bar as a template. Drill out t

Commentaires sur ces manuels

Pas de commentaire

Arb 3450080 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Arb 3450080. ARB 3450080 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Arb 3450080