Arb RD106 Manuel d'utilisateur télécharger pdf (Page 41)

6 Mounting & Connecting the Electrical System

6.2.2 Connection to an Alternate Air Source

When connecting the actuation switch to an alternate air source, the

switch(es) should be wired according to figures 27. and 28., depending

on whether one or two Air Lockers will be installed in the vehicle.

6.2.2.1 Single Air Locker System

c If only one Air Locker is to be installed in the system, the switch and

solenoid should be wired according to figure 27. regardless of

whether the Air Locker has been installed in the front or rear axle of

the vehicle.

c Attach the appropriate switch cover (i.e., ‘FRONT’ or ‘REAR’) to

the switch.

NOTE : Refer to Figure 26. for the correct switch terminal

identification and switch orientation.

Figure 27.

SINGLE Air Locker SYSTEM

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Arb RD106 Manuel d'utilisateur Page 41