Arb RD136 Manuel d'utilisateur télécharger pdf (Page 13)

3 Installing the Air Locker

3.2

Installing the Carrier Bearings

NOTE : The Air Locker has been designed to employ higher

rated 50mm carrier bearings, instead of the 45mm

carrier bearings used on the OE Nissan diff center.

Due to this it is not possible to re-use the original

bearings, and 50mm bearings must be purchased:

Timken # 32010X-32010X

ARB # 160116

 Apply a thin film of high pressure grease to the bearing journals of

the Air Locker, then press the bearing cones onto the bearing

journals as shown in Figure 5.

Figure 5.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Pas de commentaire

Arb RD136 Manuel d'utilisateur Page 13