Arb RD132 Manuel d'utilisateur télécharger pdf (Page 15)

3 Installing the Air Locker

NOTE : Before attempting to install the adjuster nuts, make

sure the threads on the inside of the bearing caps and

differential housing are perfectly aligned. If they are

not, the threads could be stripped.

 Insert and lightly hand tighten the adjuster nut supplied with the Air

Locker kit into the ring gear side bearing cap.

NOTE : You should feel no backlash between the ring and

pinion gears once the adjuster nut tightens.

 Reverse the adjuster nut (counterclockwise) ¼ turn.

 Insert the original adjuster nut onto the opposite side of the

differential and tighten with the appropriate adjuster nut wrench.

NOTE : You should now feel some backlash between the ring

and pinion gears. If not, there might be a clearance

problem which is binding the carrier. Re-check the

clearance.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

Arb RD132 Manuel d'utilisateur Page 15