Arb RD132 Manuel d'utilisateur télécharger pdf (Page 22)

3 Installing the Air Locker

Figure 14.

IMPORTANT:

In order for the seal housing to float and self center on the

bearing journal, the seal housing tube must not be pulling

against the seal housing. To check this, rotate the drive flange

back and forth while observing the seal housing movement.

The seal housing should rotate slightly against the spring clip,

but it should not appear to pull away from the face of the

adjuster nut.

IMPORTANT:

Check that the tail of the adjuster nut locking tab does not

push on the seal housing. Bend it up away from the seal

housing with a screw driver if necessary.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Pas de commentaire

Arb RD132 Manuel d'utilisateur Page 22