Arb RD147 Manuel d'utilisateur télécharger pdf (Page 16)

3 Installing the Air Locker

The thickness of the shim pack ‘B’ should make the distance ‘C’ on the

Air Locker closely match the distance ‘A’ on the existing differential

(within 0.1mm [0.004”] ).

 Use the following calculation to find the desired thickness of ‘B’:

A – C = B

(Replacement Shim Pac

HINT : If your calculations are correct then the following

equation will also be true:

A – B – C =

ZERO

 Select shims from the shim kit supplied with your Air Locker to

make the thickness ‘B’ as determined above.

 Place this shim pack between the ARB master shim and the

bearing cup.

 Re-measure the new distance ‘C’ from the Air Locker (now

including the shim pack ‘B’) to make sure that it matches ‘A’ on the

original differential.

NOTE : NEVER machine the Air Locker.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Pas de commentaire

Arb RD147 Manuel d'utilisateur Page 16