Arb RD117 Manuel d'utilisateur télécharger pdf (Page 37)

5 Mounting & Connecting the Electrical System

5.2.2.2

Dual Air Locker System

 If two Air Lockers are to be installed in the system, ARB

recommends that the switches and solenoids be wired according to

figure 23. For safety reasons, this configuration allows SOLENOID

2 to be actuated only if SOLENOID 1 is already on.

 Attach the “REAR AIR LOCKER” switch cover to SWITCH 1, and

the “FRONT AIR LOCKER” switch cover to SWITCH 2.

NOTE : Refer to Figure 21. for the correct switch terminal

identification and switch orientation.

 Configure SOLENOID 1 as the air line leading to the rear axle Air

Locker, and SOLENOID 2 as the air line leading to the front axle Air

Locker.

Figure 23.

DUAL Air Locker SYSTEM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Arb RD117 Manuel d'utilisateur Page 37