Arb RD127 Manuel d'utilisateur télécharger pdf (Page 34)

5 Mounting & Connecting the Electrical System

5.2.2.2

Dual Air Locker System

 If two Air Lockers are to be installed in the system, ARB

recommends that the switches and solenoids be wired according to

figure 26. For safety reasons, this configuration allows SOLENOID

2 to be actuated only if SOLENOID 1 is already on.

 Attach the “REAR AIR LOCKER” switch cover to SWITCH 1, and

the “FRONT AIR LOCKER” switch cover to SWITCH 2.

NOTE : Refer to figure 24. for the correct switch terminal

identification and switch orientation.

 Configure SOLENOID 1 as the air line leading to the rear axle Air

Locker, and SOLENOID 2 as the air line leading to the front axle Air

Locker.

Figure 26.

DUAL AIR LOCKER SYSTEM

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

Arb RD127 Manuel d'utilisateur Page 34