Arb RD32 Manuel d'utilisateur télécharger pdf (Page 39)

6 Mounting & Connecting the Electrical System

6.2.2.2 Dual Air Locker System

c If two Air Lockers are to be installed in the system, ARB

recommends that the switches and solenoids be wired according to

figure 25. For safety reasons, this configuration allows SOLENOID

2 to be actuated only if SOLENOID 1 is already on.

c Attach the “REAR Air Locker” switch cover to SWITCH 1, and the

“FRONT Air Locker” switch cover to SWITCH 2.

NOTE : Refer to Figure 23. for the correct switch terminal

identification and switch orientation.

c Configure SOLENOID 1 as the air line leading to the rear axle Air

Locker, and SOLENOID 2 as the air line leading to the front axle Air

Locker.

Figure 25.

DUAL Air Locker SYSTEM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Arb RD32 Manuel d'utilisateur Page 39