Arb RD74 Manuel d'utilisateur télécharger pdf (Page 13)

3 Installing the Air Locker

3.3

Drilling and Tapping the Bulkhead Port

An air line port must be drilled and tapped through the differential

housing to mount the bulkhead fitting into.

 Mark a spot on the right hand side (opposite the ring gear) toward

the top of the differential housing that is in an area well clear of the

differential, the ring gear, and any other obstructions that could

snag the seal housing tube. (Fig.6.)

Figure 6.

 Cover the drive pinion area with a rag to protect it from metal filings.

 Secure the differential housing to the work bench.

 Drill an 11.2mm [7/16”] diameter hole through the differential

housing square to the outside surface. (Fig.7.)

Figure 7.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Pas de commentaire

Arb RD74 Manuel d'utilisateur Page 13