Arb RD138 Manuel d'utilisateur télécharger pdf (Page 18)

3 Installing the Air Locker

3.6.1 Roll Pin Type

c If your diff has roll pins instead of locking tabs, slightly rotate the

adjuster nut so that the roll pin is in the center of one of the adjuster

nut teeth as shown. When installing the roll pin, knock it down

making sure that it will not contact the seal housing (Fig. 10.).

Figure 10.

3.6.2 Hook Type

c It may be necessary to modify the locking tab in order to clear the

seal housing by grinding or filing a small flat on the end. (See

Fig.11.)

Figure 11.

GRIND HERE

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Arb RD138 Manuel d'utilisateur Page 18