Arb RD85 Manuel d'utilisateur télécharger pdf (Page 17)

4 Installing the Air Locker

4.4 Assembling the Differential Carrier

c Assemble the supplied bearing cup (now installed into the seal

housing) onto the seal housing side bearing cone.

NOTE : The grooves in the seal housing will house the O-

rings in the final assembly but they will not be

installed now to avoid damage to the O-rings.

c Install the supplied master shim onto the seal housing.

NOTE : The shim pack cannot be installed at this time as the

required thickness (shown as ‘E’ in Figure 7.) has yet

to be determined.

Figure 7.

c Holding the master shim and seal housing onto one end and the

bearing cup in place at the other end, insert and hold the Air Locker

into the differential housing with the seal housing tube pointing

straight out of the housing.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

Pas de commentaire

Arb RD85 Manuel d'utilisateur Page 17