Arb RD94 Manuel d'utilisateur télécharger pdf (Page 16)

4 Installing the Air Locker

4.4 Assembling the Differential Carrier

c Place the bearing cup over the bearing cone on the seal housing

side (Fig 9.)

Figure 9.

c Slide the seal housing into place against the bearing cup (stepped

side out).

NOTE : The grooves in the bearing journal under the seal

housing, will house the O-rings in the final assembly

but they will not be installed now to avoid damage to

the O-rings.

NOTE : The shim pack cannot be installed at this time as the

required thickness (shown as ‘E’ in Figure 9.) has yet

to be determined.

c Hold the bearing cup in place on the ring gear side.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Pas de commentaire

Arb RD94 Manuel d'utilisateur Page 16