Arb RD94 Manuel d'utilisateur télécharger pdf (Page 22)

4 Installing the Air Locker

c Check that the contour of the tube will not interfere with the Air

Locker or the ring gear.

Figure 14.

NOTE : Check to ensure there is running clearance between

the cylinder cap of the Air Locker and the bearing

cap/differential housing (Fig.14.). If there is no

clearance, the bearing cap and the differential housing

may need to be ground down slightly until some

clearance exists.

NOTE : It is also a good idea to keep the tube away from the

bearing caps or any other part of the differential

casting as any contact due to vibration or shock may

wear the tube and eventually cause a leak.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Pas de commentaire

Arb RD94 Manuel d'utilisateur Page 22