Arb RD110 Manuel d'utilisateur télécharger pdf (Page 15)

3 Installing the Air Locker

3.4 Installing the Carrier Bearings

c Apply a thin film of high pressure grease to both bearing journals of

the Air Locker.

c Using a bearing press or arbor press, press one of the original

tapered roller bearing cones onto the bearing journal opposite to

the ring gear flange of the differential carrier (As shown in Figure 5.)

until the bearing seats firmly against the bearing journal shoulder.

Figure 5.

c Invert the Air Locker and press the bearing cone which was

supplied with the Air Locker kit onto the bearing journal on the ring

gear flange side of the differential (the seal housing side) until the

bearing seats firmly against the bearing journal shoulder.

NOTE : Never re-use any bearings which are damaged or

worn. Do not add any shims between the seal

housing bearing and the bearing seat.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Pas de commentaire

Arb RD110 Manuel d'utilisateur Page 15