Arb RD132 Manuel d'utilisateur télécharger pdf (Page 13)

3 Installing the Air Locker

Figure 5.

3.3 Drilling and Tapping the Bulkhead Port

An air line port must be drilled and tapped through the differential

housing to mount the bulkhead fitting into.

 Mark a spot on the right hand side (opposite the ring gear) toward

the top of the differential housing that is in an area well clear of the

differential, the ring gear, and any other obstructions that could

snag the seal housing tube. (Fig.6.)

Figure 6.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Pas de commentaire

Arb RD132 Manuel d'utilisateur Page 13