Arb RD147 Manuel d'utilisateur télécharger pdf (Page 11)

2 Removing the Existing Differential

NOTE : The differential center is heavy and quite difficult to

handle when covered in oil. Take care not to drop it.

 Relieve any tension on the spreader immediately after the

differential has been removed.

NOTE : Some Dana 44 type differentials now come from the

factory equipped with an OE master shim on the

outside of each bearing cup to setup bearing preload.

This system is used instead of using a shim pack

underneath each bearing cone. Do not mix up which

side of the differential the OE master shims came

from, as they must be re-used on assembly.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Pas de commentaire

Arb RD147 Manuel d'utilisateur Page 11