Arb RD168 Manuel d'utilisateur télécharger pdf (Page 36)

5 Mounting & Connecting the Electrical System

5.2.2 Connection to an Alternate Air Source

When connecting the actuation switch to an alternate air source, the

switch(es) should be wired according to figures 21. and 22., depending

on whether one or two Air Lockers will be installed in the vehicle.

5.2.2.1 Single Air Locker System

F If only one Air Locker is to be installed in the system, the switch and

solenoid should be wired according to figure 21. regardless of

whether the Air Locker has been installed in the front or rear axle of

the vehicle.

F Attach the appropriate switch cover (i.e., ‘FRONT’ or ‘REAR’) to

the switch.

NOTE : Refer to Figure 20. for the correct switch terminal

identification and switch orientation.

Figure 21.

SINGLE Air Locker SYSTEM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Arb RD168 Manuel d'utilisateur Page 36