Arb RD84 Manuel d'utilisateur télécharger pdf (Page 27)

3 Installing the Air Locker

3.11 Profiling the Seal Housing Tube

c Completely remove the differential spreader.

c Without using sharp, jagged tools such as pliers (usually your

hands are the best tool for this job), gently bend the seal housing

tube so that it runs along the top of the bearing cap but with

considerable clearance from the differential flange as shown in

Figure 19.

NOTE : It is a good idea to keep the tube away from the

bearing caps or any other part of the differential

casting as any contact due to vibration or shock may

wear the tube and eventually cause a leak.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Pas de commentaire

Arb RD84 Manuel d'utilisateur Page 27