Arb RD84 Manuel d'utilisateur télécharger pdf (Page 37)

5 Mounting & Connecting the Electrical System

5.2.2.2 Dual Air Locker System

c If two Air Lockers are to be installed in the system, ARB

recommends that the switches and solenoids be wired according to

figure 26. For safety reasons, this configuration allows SOLENOID

2 to be actuated only if SOLENOID 1 is already on.

c Attach the “REAR AIR LOCKER” switch cover to SWITCH 1, and

the “FRONT AIR LOCKER” switch cover to SWITCH 2.

NOTE : Refer to Figure 24. for the correct switch terminal

identification and switch orientation.

c Configure SOLENOID 1 as the air line leading to the rear axle Air

Locker, and SOLENOID 2 as the air line leading to the front axle Air

Locker.

Figure 26.

DUAL

AIR LOCKER

SYSTEM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Arb RD84 Manuel d'utilisateur Page 37