Arb RD158 Manuel d'utilisateur télécharger pdf (Page 24)

4 Installing the Air Locker

NOTE : Do not spray this soapy mixture inside the differential.



Check that leaky fittings have been adequately tightened.



Disassemble, clean threads, and reapply thread sealant if leaking

persists.



If a leak is found at the seal housing, carefully remove the seal

housing assembly and examine the O-rings. Be very careful with

the O-rings and check for defects, damage, wear, or presence of

foreign material in the O-ring grooves. Replace if necessary.

4.11 Reinstalling the Axles



Insert both axles fully into the housing and gently tap them inward.

NOTE : Be careful not to damage the axle oil seals with the

spline of the axle.



Reassemble the brakes, differential and wheels to the vehicle

according to your vehicle’s service manual.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Pas de commentaire

Arb RD158 Manuel d'utilisateur Page 24