Arb RD158 Manuel d'utilisateur télécharger pdf (Page 7)

2 Removing the Existing Differential

2.1 Vehicle Support



Safely secure the vehicle on a hoist. We recommend supporting

the vehicle on a chassis hoist to keep the differential area at a

convenient working height and to leave the wheels and axles free

to be rotated and removed.



Once supported off the ground, release the parking brake and

leave the vehicle in neutral. Chock the wheels if necessary.

2.2 Differential Fluid Drain

HINT : This is a good time to check for metal particles in

your oil, on your drain plug, or in the bottom of the

housing which may indicate a worn bearing or

differential component.



Clean around the differential cover plate seal to prevent dirt from

entering the differential.



Position a fluid drain reservoir under the differential.



If a drain plug exists, remove it and completely drain all differential

oil from the housing.



If no drain plug exists then the oil can be drained by loosening the

cover bolts and gently prying the cover away at the bottom until oil

runs out.

HINT : If a drain plug does not exist then it would be a good

idea to drill and tap for a tapered oil drain plug to assist

with future oil changes.



Once drained, remove the differential cover plate.

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

Pas de commentaire

Arb RD158 Manuel d'utilisateur Page 7