Arb RD158 Manuel d'utilisateur télécharger pdf (Page 35)

7 Testing & Final Assembly



Turn the ignition to the ‘ON’ position (leaving the motor off). The

large illuminating symbol on the Air Locker switch cover should be

‘OFF’.



Turn the compressor (or alternate air source) on to charge the air

supply up to its maximum pressure.



Rotate one wheel by hand.



The wheel should rotate freely and the opposite wheel should be

turning in the opposite direction without any resistance or

mechanical noise from within the differential.



Turn the Air Locker switch to the ‘ON’ position. The illuminated

symbol on the switch cover should light up.



Rotate the same wheel again.



Both wheels should rotate together.



Turn the switch off again.



Rotate the same wheel.



The wheels should again rotate in opposite directions.

7.3 Re-Sealing & Filling the Differential

NOTE : Consult the ARB Air Locker Operating & Service

Manual for recommendations on differential lubricant

specifications.



Install the differential cover using gasket sealant or a new standard

differential gasket for your make of vehicle.



Refill the differential until level with the filler hole.



Rotate the differential center 2 full turns.



Check the oil level and add oil if necessary.



Replace filler plug (apply thread sealant to filler plug before

inserting if it is a threaded type plug).



Wipe differential housing clean of any oil or grease which may

collect dirt or other abrasive particles.

1 2 ... 30 31 32 33 34 35 36 37 38

Commentaires sur ces manuels

Pas de commentaire

Arb RD158 Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Arb RD158